HONDA S2000 2000-09
THE FIRST STEP IN SUSPENSION PERFORMANCE
Complete your suspension upgrade with an Eibach ANTI-ROLL-KIT. While our PRO-KIT performance springs are regarded as the primary suspension enhancement components, the Eibach ANTI-ROLL-KIT allows critical fine-tuning of your Honda's handling characteristics
Our ANTI-ROLL-KITS reduce body roll through increased design stiffness over stock bars. The result: increased handling and cornering grip in any performance-driving situation.
ANTI-ROLL-KIT Part# 4043.320
- Performance Tuned Sway Bars for Improved Handling and Reduced Body-Roll
- Perfectly Balanced for Optimum Neutral-Steering Handling and Precise Turn—In Response
- Precision Engineered and Calibrated for PRO-KIT and SPORTLINE Performance Spring Kits
- Eibach Hi-Tensile Steel Alloy, Cold-Formed, Tempered and Shot-Peened for Long-Lasting Performance and Durability
- Greasable Urethane Bushings For Increased Responsiveness
- Precision Forged Ends and OEM Style Pressed Bushing Locaters (No Welding Or Weak Points Here)
- Million-Mile Warranty
Manufactured from cold-formed, tubular high-strength aircraft-grade steel for precision performance, and finished with a long-lasting red powder coat finish, the
ANTI-ROLL-KIT comes complete with all necessary mounting hardware and instructions for easy bolt-on installation.
ANTI-ROLL-KIT HONDA S2000 2000-09:
TECHNICAL INFORMATION
FRONT:
OE bar: 26.8 mm (1.06 in) tubular
OE measured bar rate: 38 N/mm (214 lbs/in)
OE bar weight: 3.6 kg (7.9 lbs)
Eibach bar: 32mm (1.25 in) tubular and adjustable
Eibach measured bar rate: 2 position adjustable
P1 = 65 N/mm (368 lbs/in)
P2 = 73 N/mm (416 lbs/in)
Eibach bar weight: 4.8 kg (10.6 lbs)
Bushing: New urethane bushings
End Link: OE
Approximate installation time: 1.0 hr
REAR:
OE bar: 25.4 mm (1.0 in) tubular
OE measured bar rate: 48 N/mm (275 lbs/in)
OE bar weight: 3.2 kg (6.4 lbs)
Eibach bar: 29 mm (1.1 in) tubular and adjustable
Eibach measured bar rate: 2 position adjustable
P1 = 90 N/mm (515 lbs/in)
P2 = 106 N/mm (605 lbs/in)
Eibach bar weight: 4.9 kg (10.8 lbs)
Bushings: New urethane bushings
End Link: OE
Approximate installation time: 1.5 hr
