TOYOTA PRIUS 2010-11
THE FIRST STEP IN SUSPENSION PERFORMANCE
Eibach PRO-KIT is the perfect answer for most frequently-driven street cars. It's our legendary spring system that dramatically improves both a vehicle's performance and appearance
PRO-KIT lowers your Prius's center of gravity, reducing squat during acceleration, body roll in corners and excessive nose-dive under braking. When combined with Plus-1 or Plus-2 wheels and tires, the Eibach PRO-KIT is the finishing touch to a winning recipe for performance. PRO-KIT also reduces excessive fender-well clearance, making your car look just as hot as it performs.
Pro-Kit #82100.140
- High Performance Handling and Aggressive Good Looks
- Lower Center of Gravity — Lowers Prius 1.2" Front and 0.8" Rear
- Stop Quicker, Corner Faster and get Better MPG
- Excellent Ride Quality
- Million—Mile Warranty
Every Eibach PRO-KIT is designed and tested by our suspension engineers and performance driving professionals, to deliver aggressive good looks and high performance handling, without ever compromising safety or ride quality. By using our proprietary, progressive spring design, PRO-KIT provides the ultimate balance to take your passion for driving to a whole new level.
TOYOTA PRIUS 2010-11 DATA:
TECHNICAL INFORMATION
FRONT:
OE rate: 21 N/mm (120 lbs/in)
PK rate: 29 N/mm (165 lbs/in)
Tubing: None
Bump-stop: New Eibach Springs bumpstop
Damper: New OE
OE wheel center to fender: 381mm (15.0in)
PK wheel center to fender: 351mm (13.8in)
Front Alignment:
OE Camber = -0.22 +/-0.75 deg
OE Caster = 6.07 +/-0.75 deg
OE Toe = 0.20 +/-0.20 deg
PK Camber = -0.2 +/-0.5 deg
PK Caster = 6.2 +/-0.75 deg
PK Toe = 0.2 +/-1mm
Pro-Kit can be aligned to OE specifications.
Approximate installation time: 1.0 hr
REAR:
OE rate: 27 N/mm (154 lbs/in)
PK rate: Progressive 25-34 N/mm (143-194 lbs/in)
Tubing: None
Bump-stop: New OE
Damper: New OE
OE wheel center to fender: 369mm (14.5in)
PK wheel center to fender: 348mm (13.7in)
Rear Alignment:
OE Camber = -1.5 +/-0.5 deg
OE Toe = 0.33 +/- 0.3 deg
PK Camber = -1.4 +/-0.5 deg
PK Toe = 0.24 +/- 0.3 deg
Pro-Kit can be aligned to OE specifications.
Approximate installation time: 1.0 hr
